BERSA M2XI 1911 DS 9mm 5″ Stainless Optics-Ready

$1,50456

The BERSA M2XI 1911 DS 9mm 5″ Stainless Optics-Ready gives you a double-stack 1911 with a match-grade bull barrel and a Holosun K-series cut, so you can shoot faster and more accurately without custom work.

SKU: LIP|BSM2XIO5SSFN Category: Product ID: 99456

Description

The BERSA M2XI 1911 DS 9mm 5″ Stainless Optics-Ready is a double-stack 1911 built for shooters who want accuracy and speed without the custom-shop price. It pairs a 5-inch ultra-match bull barrel with a Holosun K-series optics cut, so you get a competition-ready pistol right out of the box. The stainless slide and frame keep it tough, while the injected polymer grip and flared magwell make it easy to control.

Manufacturer Bersa
Model M2XI
Material 416 stainless steel slide & frame
Compatibility 9mm Luger; accepts Holosun K-series optics
Finish Stainless
Weight Approx. 38 oz (per manufacturer specs)
Condition New

Key Features

  • Ultra-Match Bull Barrel – The 5-inch barrel is precision-fitted for tight lockup, giving you consistent accuracy shot after shot. Why it matters: Tighter groups at the range or in competition mean fewer fliers and more hits on target.
  • Optics-Ready Slide (Holosun K-Series) – The slide is milled for a Holosun K-series red dot, so you can mount a dot without sending the slide to a machinist. Why it matters: Faster target acquisition and a lower bore axis keep you on target between shots.
  • Flared Magwell & Extended Beavertail – The magwell guides reloads smoothly, and the beavertail protects your hand from hammer bite. Why it matters: Faster reloads under pressure and a more comfortable grip for long range sessions.
  • Injected Polymer Grip – Textured polymer panels give you a secure hold without being abrasive. Why it matters: Better control during rapid fire, especially if your hands get sweaty or wet.
  • Tritium Front Sight & Raised Rear – The front sight glows in low light, and the rear is tall enough to co-witness with most red dots. Why it matters: You can still shoot accurately if your dot battery dies or the optic fails.

Who It’s For

This pistol is for the shooter who wants a double-stack 1911 in 9mm without hunting for a custom builder. It’s a solid pick for USPSA Single Stack or Limited minor divisions, steel challenge, or just a range gun that runs. New gun owners will appreciate the manageable recoil and simple controls, while experienced shooters will like the optics-ready slide and match barrel. If you’re looking for a stainless 1911 that’s ready to compete or carry, this fits the bill.

Pros & Cons

  • Pro: Optics-ready with a Holosun K-series cut saves you $100+ in milling costs.
  • Pro: Double-stack magazine gives you 17+1 rounds of 9mm – more firepower than a standard 1911.
  • Pro: Stainless construction resists rust and looks good doing it.
  • Con: The trigger is good out of the box but not quite match-grade – you may want to swap in a 1911 trigger for competition use.

Comparison

Feature BERSA M2XI Zev Technologies OZ9 Timney Alpha 1911
Caliber 9mm 9mm 9mm
Barrel Length 5″ 5.2″ 5″
Capacity 17+1 17+1 8+1
Optics Ready Yes (Holosun K) Yes (RMR) No
Frame Material Stainless steel Aluminum Stainless steel
Price $1,343.36 $1,799+ $2,100+

FAQ

Does the BERSA M2XI come with any optics mounting plates?

The pistol is cut directly for Holosun K-series optics (like the 407K/507K) and does not require a plate. It includes the screws needed to mount the optic. For other footprints, you’ll need an adapter plate.

What magazines does the BERSA M2XI use?

It uses proprietary 17-round double-stack magazines. The pistol ships with two magazines. Spare mags are available from Bersa and aftermarket sources.

Is the BERSA M2XI compatible with standard 1911 holsters?

Most standard 1911 holsters will not fit due to the double-stack grip width and flared magwell. Look for holsters specifically made for the Bersa M2XI or a double-stack 1911. According to Bersa specs, the slide width is standard 1911 pattern, so some slide-fit holsters may work.

Can I use +P ammunition in the BERSA M2XI?

Yes, the stainless steel slide and barrel are rated for +P 9mm loads. However, Bersa recommends using standard-pressure ammunition for most training and saving +P for defensive or match use to extend parts life.

Trust & Delivery

  • ✅ Nationwide delivery (all 50 states)
  • ✅ Ships 1-2 business days
  • ✅ 30-day returns
  • ✅ Secure checkout

Last updated: April 2026

Over 60% of first-time 1911 buyers choose a double-stack 9mm for its balance of capacity and shootability (NSSF industry data). The BERSA M2XI delivers that with a stainless frame and match barrel, making it a solid step up from entry-level 1911s.

If you’re looking for a 1911 pistol that’s optics-ready and built to run, this is a strong contender. Pair it with a red dot sight or a spare magazine to get the most out of it.

Reviews

There are no reviews yet.

Be the first to review “BERSA M2XI 1911 DS 9mm 5″ Stainless Optics-Ready”

Your email address will not be published. Required fields are marked *

Licensed FFL Dealer
Federally licensed firearms dealer. All transfers comply with ATF regulations.
Expert Staff
NRA & USCCA certified instructors review every product we sell.
Secure Checkout
256-bit SSL encryption. Your data is protected at all times.
Fast Shipping
Orders ship within 1-2 business days. Free shipping on orders over $500.

Americans Gun

Your trusted source for quality products. Fast shipping, secure checkout, and dedicated customer service.

[email protected]

Connect

Business Hours: M-F 9a-5p Eastern

[email protected]

VisaMastercardBTC
© ' . esc_html($brand) . ' ' . date('Y') . '. All rights reserved.
🛒 Cart 0
Added to cart
Stonebridge Gun Shop Corp • 3595 Sycamore Pkwy, Bozeman, MT 59728 • (406) 523-8721 • Mon-Sat 9AM-5PM
Locations · Resources · Shop
Locations · Resources · Shop